BMAX

WELDING UNITS
FILTERS

Filter the product range using the parameters below.

░▒▓ BMAX ▓▒░
HEGESZTÉSTECHNIKA

WE ALSO CARRY OUT THE ANNUAL INSPECTIONS OF WELDING MACHINES ACCORDING TO HUNGARIAN LEGISLATION.

INFORMATION

FILTER WELDING UNITS

There are two ways to find the best unit:

1. If you do not wish to seen one or more units, you can discard them by clicking the X in the upper roght corner of the unit card. You can undo this move within 3 seconds.

2. Click on "FILTERS" under the header or the red button on the left to open the filter panel.


REQUEST A QUOTE

1. Choose at least one welding unit by checking the "REQUEST A QUOTE" checkbox on the card of the unit.

2. Having selected the desired products, click on the "REQUEST A QUOTE" button under the header, or the "$" icon on the left.

3. Fill in the required data on the pop-up manu, and click on "SEND".


WELDING UNIT COMPARISON

1. Choose at least two welding units by checking the "COMPARE UNITS" checkbox on the card of the relevant units.

2. Having selected the desired products, click on the "COMPARE UNITS" button under the header, or the "?" icon on the left.

3. The page comparing units will appear as a pop-up page.


░▒▓ BMAX ▓▒░
HEGESZTÉSTECHNIKA

BLOW OUT YOUR WELDING MACHINE WITH COMPRESSED AIR AT LEAST ONCE A MONTH!

REQUEST A QUOTE

Please provide the following data to request a quote.

* required
* required
CAPTCHA is not available. Refresh the page.
If you cannot read the code, click here.

Please enter the 6-digit verification code in the picture.

By sending this you accept our Privacy Statement and the rules therein.

░▒▓ BMAX ▓▒░
HEGESZTÉSTECHNIKA

DID YOU KNOW THAT MIG / MAG WELDING CAN BE DONE WITH DIFFERENT GAS MIXTURES?

INFORMATION FOR OPERATION
ALL WELDING UNITS
FILTERS
REQUEST A QUOTE
WELDING UNIT COMPARISON
+
Hobbigép
MM 161
MM 161
IN STOCK
●●●○○
The MM 161 welding machine is an excellent choice for beginners. It is particularly recommended where three-phase mains are not available or where on-site work is common. The machine is suitable for 2-stroke, 4-stroke, sectional and arc spot welding. Backburn can be set on the control electronics according to the welding task.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 1 phase, Air-cooled

Nominal welding current: 35-160 A

Material thickness: 0.6 mm - 4 mm

Network power: 4.5 KVA

Network fuse: 16 A

Number of control steps: 7

Switch-on time: 35%

Special functions: nincs

Dimensions: 750x380x600 mm

Weight: 62 kg

Bmax tipp

Every six months check the bolted joints in the welding machine and tighten them if necessary!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
Hobbigép
MM 201
MM 201
IN STOCK
●●●●○
The MM 201 welding machine is an excellent choice for beginners. It is particularly recommended where three-phase mains are not available or where on-site work is common. The machine is suitable for 2-stroke, 4-stroke, sectional and arc spot welding. Backburn can be set on the control electronics according to the welding task.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 1 phase, Air-cooled

Nominal welding current: 35-200 A

Material thickness: 0.6 mm - 5 mm

Network power: 5.5 KVA

Network fuse: 25 A

Number of control steps: 7

Switch-on time: 35%

Special functions: nincs

Dimensions: 750x380x600 mm

Weight: 65 kg

Bmax tipp

Bmax Ltd. has a byword for reliability for over 30 years

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
AKCIÓS !
MM 223
MM 223
LAST PIECES
●●●○○
This model is recommended for a wide range of small industry and maintenance applications. It is suitable for welding thin and medium thickness plates, hollow sections, angle iron constructions, but it is also excellent for the production of decorative elements in aluminium. The equipment is equipped with NG433 control electronics for 2-stroke, 4-stroke, sectional and arc spot welding.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled

Nominal welding current: 35-220 A

Material thickness: 0.6 mm - 6 mm

Network power: 7 KVA

Network fuse: 3x15 A

Number of control steps: 7

Switch-on time: 35%

Special functions: nincs

Dimensions: 750x380x600 mm

Weight: 79 kg

Bmax tipp

Bmax welding machines can withstand the stresses of industrial use.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 253
MM 253
IN STOCK
●●●●○
This model is recommended for a wide range of small industry and maintenance applications. It is suitable for welding thin and medium thickness plates, hollow sections, angle iron constructions, but it is also excellent for the production of decorative elements in aluminium. The equipment is equipped with NG433 control electronics for 2-stroke, 4-stroke, sectional and arc spot welding.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled

Nominal welding current: 35-250 A

Material thickness: 0.8 mm - 8 mm

Network power: 8.5 KVA

Network fuse: 3x15 A

Number of control steps: 10

Switch-on time: 35%

Special functions: huzalvisszaégés állítás

Dimensions: 750x380x600 mm

Weight: 83 kg

Bmax tipp

Letter S in the type code of the welding unit indicates that the unit has a separated design.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 253 Syn
MM 253 Syn
IN STOCK
●●●○○
This model is recommended for a wide range of small industry and maintenance applications. It is suitable for welding thin and medium thickness plates, hollow sections, angle iron constructions, but it is also excellent for the production of decorative elements in aluminium. The synergic design, with automatic welding assistance functions, makes everyday welding tasks easier.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Air-cooled

Nominal welding current: 35-250 A

Material thickness: 0.8 mm - 8 mm

Network power: 8.5 KVA

Network fuse: 3x15 A

Number of control steps: 10

Switch-on time: 35%

Special functions: huzalvisszaégés - gázutánfolyás állítás

Dimensions: 750x380x600 mm

Weight: 83 kg

Bmax tipp

Repair of a welding unit must be carried out by qualified personnel only!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
AKCIÓS !
MM 323
MM 323
IN STOCK
●●●●●
The most popular of the range, this model is suitable for light steel construction and maintenance work, both on site and in the workshop. The control electronics with soft start and backburn functions make the equipment ideal for welding both aluminium and acid-resistant materials.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled

Nominal welding current: 35-320 A

Material thickness: 0.8 mm - 15 mm

Network power: 12 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft Start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 105 kg

Bmax tipp

Duty cycle is the ratio of welding time to the cycle time

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 323 W
MM 323 W
MANUFACTURING IN PROGRESS
●●○○○
This product range is suitable for light steel construction and maintenance work, both on-site and in the workshop, and is ideal for welding aluminium and acid-resistant materials. The water-cooled design allows continuous high current welding through a more efficient cooling solution.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Water-cooled

Nominal welding current: 35-320 A

Material thickness: 0.8 mm - 15 mm

Network power: 12 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x1200 mm

Weight: 140 kg

Bmax tipp

Do you have a problem with your welding machine? We can offer a solution. Please visit us in District 21 of Budapest.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
CSÚCS-
MODELL
! ! !
MM 323 Syn
MM 323 Syn
LAST PIECES
●●●●○
This product range is suitable for light steel construction and maintenance work, both on-site and in the workshop, and is ideal for welding aluminium and acid-resistant materials. The synergic design, with automatic welding assistance functions, makes everyday welding tasks easier.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Air-cooled

Nominal welding current: 35-320 A

Material thickness: 0.8 mm - 15 mm

Network power: 12 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 105 kg

Bmax tipp

All our welding units have been developed by our team.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
CSÚCS-
MODELL
! ! !
MM 323 W Syn
MM 323 W Syn
MANUFACTURING IN PROGRESS
●●○○○
This product is suitable for the production of light steel structures and maintenance work, both on site and in the workshop. Excellent for welding aluminium and acid-resistant materials. The synergic design makes everyday tasks easier, and the water cooling allows continuous high current welding.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Water-cooled

Nominal welding current: 35-320 A

Material thickness: 0.8 mm - 15 mm

Network power: 12 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 800x400x1200 mm

Weight: 140 kg

Bmax tipp

Do you have a question in connection with your Bmax welding unit? You can post it in our FORUM to support your colleagues.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 403
MM 403
IN STOCK
●●●○○
The MM 403 is a 3-phase welding machine that is ideally suited for the fabrication and maintenance of medium-heavy steel structures. It is capable of welding up to 20 mm of non-alloy carbon steel, with a compact design that makes it the most affordable model in the range. Its high duty cycle also allows continuous use for intensive production tasks.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled

Nominal welding current: 40-400 A

Material thickness: 0.8 mm - 20 mm

Network power: 17 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 115 kg

Bmax tipp

Please visit us at our premises between 6:30 am and 2:50 pm from Monday to Thursday, or between 6:30 am and 2:00 on Friday.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 403 W
MM 403 W
LAST PIECES
●●●●●
The MM 403W welding machine is ideal for the construction and maintenance of medium-heavy steel structures. It is suitable for welding non-alloy carbon steel up to 20 mm, while its high duty cycle enables continuous and intensive production tasks. The water-cooled design allows continuous high-current welding through more efficient cooling.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Water-cooled

Nominal welding current: 40-400 A

Material thickness: 0.8 mm - 20 mm

Network power: 17 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 115 kg

Bmax tipp

Our shop offers a wide range of welding and safety accessories.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
IPARI
MM 403 Syn
MM 403 Syn
MANUFACTURING IN PROGRESS
●●○○○
This 3-phase synergic welding unit is ideal for the fabrication and maintenance of medium-heavy steel structures. It is suitable for welding non-alloy carbon steel up to 20 mm, and its synergic design makes everyday welding tasks easier. Their high duty cycle also allows for continuous operation of intensive production tasks.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Air-cooled

Nominal welding current: 40-400 A

Material thickness: 0.8 mm - 20 mm

Network power: 17 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880*390*770 mm

Weight: 115 kg

Bmax tipp

Bmax Ltd. aims to manufacture welding machines that are easy to use for everyone.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 403 W Syn
MM 403 W Syn
LAST PIECES
●●○○○
This welding unit is ideal for the fabrication and maintenance of medium-heavy steel structures. It is suitable for welding non-alloy carbon steel up to 20 mm, and the synergic design with automatic welding assistance functions makes work easier. Its high duty cycle also allows continuous high-current welding for intensive production tasks. The water-cooled design allows continuous high-current welding through more efficient cooling.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Water-cooled

Nominal welding current: 40-400 A

Material thickness: 0.8 mm - 20 mm

Network power: 17 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x1200 mm

Weight: 151 kg

Bmax tipp

Welding is greatly facilitated by the use of an automatic welding shield.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 453
MM 453
MANUFACTURING IN PROGRESS
●●○○○
This product range includes our largest compact welding units. MM453 is recommended for use in the production of medium and heavy steel structures, the assembly and repair of steel-framed buildings, and for heavy-duty welding jobs. Its high duty cycle also allows continuous operation for intensive production tasks.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 20 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 125 kg

Bmax tipp

Did you know that CORGON gas is 82% argon and 18% carbon dioxide?

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 453 W
MM 453 W
LAST PIECES
●●●●○
This product range includes our largest compact welding units. MM453 W is recommended for use in the production of medium and heavy steel structures, the assembly and repair of steel-framed buildings, and for heavy-duty welding jobs. The water-cooled design allows continuous high-current welding through a more efficient cooling solution.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Water-cooled

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 20 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 125 kg

Bmax tipp

Did you know that each Bmax welding unit is equipped with transformer with a copper coil that has been developed by our team?

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 453 Syn
MM 453 Syn
MANUFACTURING IN PROGRESS
●●●●○
This product range includes our largest compact welding units. MM453 is recommended for use in the production of medium and heavy steel structures, the assembly and repair of steel-framed buildings, and for heavy-duty welding jobs. Its high duty cycle also allows continuous operation for intensive production tasks.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Air-cooled

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 20 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 125 kg

Bmax tipp

Remove contaminants for the wire guide spiral once a month. If necessary, replace the spiral.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 453 W Syn
MM 453 W Syn
MANUFACTURING IN PROGRESS
●●○○○
This unit is recommended for use in heavy-duty welding workplaces in the construction of medium and heavy steel structures, installation and repair of steel-framed buildings. The water-cooled design allows continuous high-current welding through more efficient cooling, and the synergic design with automatic welding assistance functions makes everyday welding tasks easier.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Water-cooled

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 20 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 125 kg

Bmax tipp

Our company also validates welding machines.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 323 S
MM 323 S
MANUFACTURING IN PROGRESS
●●○○○
This product range is suitable for light steel construction and maintenance work, both on site and in the workshop. The soft start and backburn functions make the equipment ideal for welding aluminium and acid-resistant materials. The separated design extends the range of the welding machine, thanks to the separate wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled, Separated

Nominal welding current: 35-320 A

Material thickness: 0.8 mm - 15 mm

Network power: 12 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 105 kg

Bmax tipp

Did you know that Bmax machines perform welding jobs all over Europe every day?

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 323 SW
MM 323 SW
IN STOCK
●●○○○
This product range is suitable for light steel construction and maintenance work, both on site and in the workshop. The units are ideally suited for welding aluminium and acid resistant materials. The water-cooled design allows continuous high-current welding, while the separated design extends the welding machine's range with the separate wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Water-cooled, Separated

Nominal welding current: 35-320 A

Material thickness: 0.8 mm - 15 mm

Network power: 12 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 105 kg

Bmax tipp

We are ready to train your employees to contribute to the success of your welding unit purchase.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 323 S Syn
MM 323 S Syn
MANUFACTURING IN PROGRESS
●●○○○
This product range is suitable for light steel construction and maintenance work, both on site and in the workshop. The units are ideally suited for welding aluminium and acid resistant materials. The synergic design with automatic welding assistance functions makes everyday welding tasks easier. The water-cooled design allows continuous high-current welding, while the separated design extends the welding machine's range with the separate wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Air-cooled, Separated

Nominal welding current: 35-320 A

Material thickness: 0.8 mm - 15 mm

Network power: 12 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 105 kg

Bmax tipp

Check cable insulation before starting any work!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
IPARI
MM 323 SW Syn
MM 323 SW Syn
IN STOCK
●●○○○
This product range is suitable for light steel construction and maintenance work, both on site and in the workshop. The units are ideally suited for welding aluminium and acid resistant materials. The water-cooled design allows continuous high-current welding through more efficient cooling. The synergic design with automatic welding assistance functions makes everyday welding tasks easier. The water-cooled design allows continuous high-current welding, while the separated design extends the welding machine's range with the separate wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Water-cooled, Separated

Nominal welding current: 35-320 A

Material thickness: 0.8 mm - 15 mm

Network power: 12 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 105 kg

Bmax tipp

Letter W in the type code of the welding unit indicates that the unit is water-cooled.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 403 S
MM 403 S
LAST PIECES
●●●○○
This 3 phase welding unit is ideal for the fabrication and maintenance of medium heavy steel structures. It is suitable for welding non-alloy carbon steel up to 20 mm. Its high duty cycle also allows continuous operation for intensive production tasks. The separated design extends the range of the welding machine by means of a separate wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled, Separated

Nominal welding current: 40-400 A

Material thickness: 0.8 mm - 20 mm

Network power: 17 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 105 kg

Bmax tipp

Did you know that Bmax welding machines are fully repairable?

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 403 SW
MM 403 SW
LAST PIECES
●●●○○
This 3 phase welding unit is ideal for the fabrication and maintenance of medium heavy steel structures. It is suitable for welding non-alloy carbon steel up to 20 mm. Its high duty cycle also allows continuous operation for intensive production tasks. The water-cooled design allows continuous high-current welding. The separated design extends the range of the welding machine by means of a separate wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Water-cooled, Separated

Nominal welding current: 40-400 A

Material thickness: 0.8 mm - 20 mm

Network power: 17 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 115 kg

Bmax tipp

Check the tightness of the gas circuit at the start of each job!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 403 S Syn
MM 403 S Syn
MANUFACTURING IN PROGRESS
●●●●○
This 3 phase welding unit is ideal for the fabrication and maintenance of medium heavy steel structures. It is suitable for welding non-alloy carbon steel up to 20 mm. Its high duty cycle also allows continuous operation for intensive production tasks, and the synergic design with automatic welding assistance functions makes everyday welding tasks easier. The separated design extends the range of the welding machine by means of a separate wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Air-cooled, Separated

Nominal welding current: 40-400 A

Material thickness: 0.8 mm - 20 mm

Network power: 17 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 115 kg

Bmax tipp

Clean your welding machine regularly for long-lasting, reliable operation!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 403 SW Syn
MM 403 SW Syn
LAST PIECES
●●○○○
This 3 phase welding unit is ideal for the fabrication and maintenance of medium heavy steel structures. It is suitable for welding non-alloy carbon steel up to 20 mm. Its high duty cycle also allows continuous operation for intensive production tasks, and the synergic design with automatic welding assistance functions makes everyday welding tasks easier. The water-cooled design allows continuous high-current welding. The separated design extends the range of the welding machine by means of a separate wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Water-cooled, Separated

Nominal welding current: 40-400 A

Material thickness: 0.8 mm - 20 mm

Network power: 17 KVA

Network fuse: 3x25 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 115 kg

Bmax tipp

Did you know that according to Hungarian legislation, welding units require an annual inspection?

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 453 S
MM 453 S
IN STOCK
●●●○○
This machine is the largest one of our compact welding units. It is recommended for heavy-duty welding jobs in the construction of medium and heavy steel structures, construction and repair of steel-framed buildings. In addition, the separated design extends the reach of the welding machine by means of the separated wire feed unit.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled, Separated

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 20 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 125 kg

Bmax tipp

Please contact us for servicing other makes of welding machines!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 453 SW
MM 453 SW
IN STOCK
●●○○○
The machine is recommended for heavy-duty welding jobs in the construction of medium and heavy steel structures, construction and repair of steel-framed buildings. In addition, the separated design extends the range of the welding machine by means of the separated wire feed unit. And the water-cooled design allows for continuous high-current welding through more efficient cooling.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Water-cooled, Separated

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 20 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 125 kg

Bmax tipp

Did you know that Bmax Ltd manufactures 31 different types of machines?

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 453 S Syn
MM 453 S Syn
MANUFACTURING IN PROGRESS
●●○○○
The recommended application for this machine is to serve heavy-duty welding workplaces in the construction of medium and heavy steel structures, construction and repair of steel-framed buildings. In addition, the separated design extends the reach of the welding machine, thanks to the separate wire feed unit. The synergic design, with automatic welding assistance features, makes everyday welding tasks easier.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Air-cooled, Separated

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 20 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 125 kg

Bmax tipp

Synergic welding machines are equipped with electronic welding support functions.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 453 SW Syn
MM 453 SW Syn
ONLY ON ORDER
●●○○○
This unit is recommended for serving heavy-duty welding workplaces involved in the fabrication of medium and heavy steel structures and the erection of steel-framed buildings. The synergic design with automatic welding assistance functions makes everyday welding tasks easier. In addition, the separated design extends the reach of the welding machine by means of a separate wire feed unit. And the water-cooled design allows for continuous high-current welding through more efficient cooling.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Synergic, Water-cooled, Separated

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 20 KVA

Network fuse: 3x35 A

Number of control steps: 3x7

Switch-on time: 45%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 125 kg

Bmax tipp

Do you have questions about how to maintain your welding unit? Visit our FORUM page!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
MM 450 SW
MM 450 SW
PRODUCT ON DISCONTINUATION
●●○○○
The MM450 SW is one of the large industrial welding machines produced by Bmax Ltd. When welding steel structures and tanks, it is a great advantage that the power source does not need to be moved, and the separate MB501 4-roller wire feeder provides the necessary mobility for the work. The unit is equipped with WEL1.2 electronics, has a digital voltmeter and ammeter, and stores the last measured value on the display after the welding has been finished.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Water-cooled, Separated

Nominal welding current: 40-450 A

Material thickness: 0.8 mm - 25 mm

Network power: 22 KVA

Network fuse: 3x35 A

Number of control steps: 4x10

Switch-on time: 60%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 1100x550x800 mm

Weight: 140 kg

Bmax tipp

Always adhere to work safety regulations when welding!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
IPARI
MM 600 SW
MM 600 SW
ONLY ON ORDER
●●○○○
The MM600 SW is one of the large industrial welding machines produced by Bmax Ltd. When welding steel structures and tanks, it is a great advantage that the power source does not need to be moved, and the separate MB501 4-roller wire feeder provides the necessary mobility for the work. The unit is equipped with WEL1.2 electronics, has a digital voltmeter and ammeter, and stores the last measured value on the display after the welding has been finished.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Water-cooled, Separated

Nominal welding current: 40-600 A

Material thickness: 0.8 mm - 25 mm

Network power: 35 KVA

Network fuse: 3x35 A

Number of control steps: 4x10

Switch-on time: 35%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 1100x550x800 mm

Weight: 150 kg

Bmax tipp

Spare parts are available for all our current and previous models.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
NÉPSZERŰ
MM 2500
MM 2500
IN STOCK
●●●●●
This is one of the basic models of the new ecodesign product range, with even better welding capabilities than before. It can be operated at a higher than ever duty cycle (60%). It is ideally suited for light steel construction and maintenance work and has no problems welding aluminium and acid-resistant materials.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled

Nominal welding current: 40-250 A

Material thickness: 0.8 mm - 8 mm

Network power: 9 KVA

Network fuse: 3x16 A

Number of control steps: 11

Switch-on time: 60%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 750x380x600 mm

Weight: 90 kg

Bmax tipp

Our products are manufactured according to ISO9001 certification.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
IPARI
MM 3000
MM 3000
IN STOCK
●●●●●
The MM 3000 is a 3-phase welding unit, one of the basic models of the new ecodesign product range, with even better welding characteristics than before. It can be operated with a higher duty cycle of 60% than ever before. It is ideal for the production and maintenance of medium-weight steel structures. It is suitable for welding non-alloy carbon steel up to 20 mm.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled

Nominal welding current: 40-300 A

Material thickness: 0.8 mm - 15 mm

Network power: 12,5 KVA

Network fuse: 3x20 A

Number of control steps: 3x7

Switch-on time: 60%

Special functions: Soft Start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 105 kg

Bmax tipp

Send your inquiries to the bmax [kukac] bmax [pont] hu email address.

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
+
CSÚCS-
MODELL
! ! !
MM 4200
MM 4200
IN STOCK
●●●●●
This is one of the basic models of the new ecodesign product range, with even better welding capabilities than before. It can be operated at a higher than ever duty cycle (60%). It is ideally suited for medium heavy and heavy steel structure construction and maintenance work and for heavy-duty welding workplaces.
SPECIFICATIONS
I HAVE A QUESTION ...
DOWNLOAD SPECIFICATION SHEET

BACK

SPECIFICATIONS:

Main characteristics: 3 phase, Air-cooled

Nominal welding current: 40-420 A

Material thickness: 0.8 mm - 25 mm

Network power: 21 KVA

Network fuse: 3x32 A

Number of control steps: 3x7

Switch-on time: 60%

Special functions: Soft start, huzalvisszaégés - gázutánfolyás állítás

Dimensions: 880x390x770 mm

Weight: 115 kg

Bmax tipp

Do you need some tips in connection with welding? Visit our FORUM page!

░▒▓ BMAX HEGESZTÉSTECHNIKA ▓▒░
START COMPARISON